Max Pressure (psi)¹ | 160 | 250 | |||||
Maximum number of nozzles² | 24 | 40 | |||||
Flow rate (gpm) | 0.5 | 1 | |||||
Voltage Available | 110/220V AC - 12V DC | 110/220V AC - 12V DC | |||||
Full load Amps (110V AC) | 1.2 | 0.9 | |||||
Pump Inlet³ | 3/8" push lock | 3/8" push lock | |||||
Pump Outlet³ | 1/4" push lock | 1/4" push lock | |||||
Fitting and tube size | 1/4" | 1/4" | |||||
Fitting type | Push-lock | Push-lock | |||||
Recommended operating Temp. | 33⁰- 140⁰ F | 33⁰- 140⁰ F | |||||
Noise level | 35 DB. | 35 DB. | |||||
Nozzle size | 0.012" | 0.012" | |||||
Motor type | Enclosed | Enclosed | |||||
On-off Switch | No | Yes | |||||
Built-in Solenoid valve* | No | Yes | |||||
Run dry | Yes | Yes | |||||
Self- priming | Yes | Available** | |||||
Enclosure | No | Yes | |||||
Built-in Filtration | No | Yes | |||||
Thermal safety Switch⁴ | Yes | Yes | |||||
By-pass | Yes | Yes | |||||
Oil Less | Yes | Yes | |||||
Smartphone Control | No | Optional | |||||
Timers and controllers | No | Yes | |||||
Dimensions (inch) | 7.5 x 4 x 3.5 | 17 x 9.5 x10 | |||||
Weight (lbs.) | 6 | 13 |
¹ Max. Pressure is measured with one nozzle on the system. It depends on line length and numbers of nozzles.
²Numbers of nozzles depends on size of the nozzle orifice.
³ Every Mistcooling pumps comes with 3/4" GHT and filter kit, which can be attached at pump inlet.
⁴Thermal safety switch is set at 140⁰F and it may cycle off for cooling.
*Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned ON. Likewise, water flow will be cut off when power switch is turned OFF.
**Contact supplier for modifications
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article