Pump | 1000 | 1500 (OIL- LESS) | 1500 (OIL-BASED) |
Flow rate (gpm) | 0.15/ 0.3 | 0.15/ 0.3 | 0.5/ 1/ 2 |
Maximum number of nozzles² | 20/ 40 | 20/ 40 | 45/ 85 /160 |
Filtration | 5 Micron | 5 Micron | 5 Micron |
Voltage Available | 110/220V AC - 12V DC | 110/220V AC | 110/220V AC |
Full load Amps | 0.98 | 2.15 | 9.2 |
RPM | 1800 | 1820 | 1750 |
HP | 0.25 | 0.25 | 0.5-2 |
Pump Inlet³ | 3/8" push lock | 3/8" push lock | 3/8" push lock |
Pump Outlet³ | 3/8" push lock | 1/4" push lock | 1/4" push lock |
Fitting and tube size | 3/8" | 1/4" | 1/4" |
Fitting type | Compression | Push-lock | Push-lock |
Nozzle size | 0.008" | 0.006" | 0.006" |
Drive | Direct | Direct | Direct |
Motor type | Enclosed | Enclosed | TEFC |
Recommended operating Temp. | 33⁰- 140⁰ F | 33⁰- 140⁰ F | 33⁰- 160⁰ F |
Noise level | 60-70 DB | 60-70 DB | 50-60 DB |
Solenoid | No | Yes | Yes |
Pressure switch/ No water cut-off | No | Yes | Yes |
Thermal safety Switch⁴ | Yes | Yes | No |
By-pass | Yes | Yes | Yes |
Re-usable fittings | No | Yes | Yes |
Adjustable Nozzle | No | Yes | Yes |
Anti-drip Nozzles | No | Yes | Yes |
Drain valve tee | No | Yes | Yes |
Smartphone Control | No | Optional | Optional |
Timers and controllers | No | Yes | Yes |
Oil Less | Yes | Yes | No |
Dimensions (inch) | 15x9x10 | 15x14x10 | 26x12x13 |
¹ Max. Pressure is measured with one nozzle on the system. It depends on line length and numbers of nozzles.
²Numbers of nozzles depends on nozzle orifice size and flow rate of the pump. (Here 0.006” orifice size)
³ Every Mistcooling pumps comes with 3/4" GHT and filter kit, which can be attached at pump inlet.
⁴Thermal safety switch is set at 140⁰F and it may cycle off for cooling.
*Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned ON. Likewise, water flow will be cut off when power switch is turned OFF.
Note: Pressure switch or No water cut off switch will turn off the mist pump if inlet water source is turned-off. This safety feature protects the mist pump from any damage due to lack of water.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article