Low Vs Mid Vs High Pressure Comparison Chart

Modified on Wed, May 26, 2021 at 10:45 AM

Maximum number of nozzles²	1000	1500 (OIL- LESS)	1500 (OIL-BASED)
Flow rate (gpm)	20-40	20-40	45-160
Filtration	0.15- 0.3	0.15- 0.3	0.5- 2
Voltage Available	5 Micron	5 Micron	5 Micron
Full load Amps	110/220V AC - 12V DC	110/220V AC	110/220V AC
RPM	0.98	2.15	9.2
HP	1800	1820	1750
Pump Inlet³	0.25	0.25	0.5-2
Pump Outlet³	3/8" push lock	3/8" push lock	3/8" push lock
Fitting and tube size	3/8" push lock	1/4" push lock	1/4" push lock
Fitting type	3/8"	1/4"	1/4"
Nozzle size	Compression	Push-lock	Push-lock
Drive	0.008"	0.006"	0.006"
Motor type	Direct	Direct	Direct
Recommended operating Temp.	Enclosed	Enclosed	TEFC
Noise level	33⁰- 140⁰ F	33⁰- 140⁰ F	33⁰- 160⁰ F
Solenoid	60-70 DB	60-70 DB	50-60 DB
Pressure switch/ No water cut-off	No	Yes	Yes
Thermal safety Switch⁴	No	Yes	Yes
By-pass	Yes	Yes	No
Re-usable fittings	Yes	Yes	Yes
Adjustable Nozzle	No	Yes	Yes
Anti-drip Nozzles	No	Yes	Yes
Drain valve tee	No	Yes	Yes
Smartphone Control	No	Yes	Yes
Timers and controllers	No	Optional	Optional
Oil Less	No	Yes	Yes
Dimensions (inch)	Yes	Yes	No
Weight (lbs.)	15x9x10	15x14x10	26x12x13
Maximum number of nozzles²	16	17	61

¹ Max. Pressure is measured with one nozzle on the system. It depends on line length and numbers of nozzles.

²Numbers of nozzles depends on size of the nozzle orifice.

³ Every Mistcooling pumps comes with 3/4" GHT and filter kit, which can be attached at pump inlet.

⁴Thermal safety switch is set at 140⁰F and it may cycle off for cooling.

*Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned ON. Likewise, water flow will be cut off when power switch is turned OFF.

Note: Pressure switch or No water cut off switch will turn off the mist pump if inlet water source is turned-off. This safety feature protects the mist pump from any damage due to lack of water.